2005 CAT D5N for sale in Buffalo, NY
WARRANTY INCLUDED - 2655 Hours - 2009 Midwestern 540 Draw Works Installed in 2010 at 2133 Hours, 20 Foot Boom, Draw Works and Boom Certified, 40,000 LB. Lifting Capacity, 30" Pads, Rear Screen, Fire Extinguisher, 6 Way PAT Blade - For Rentals in the US - Free Customs & Delivery Within 500 Miles with a 3 Month Rental - Video is Available for Viewing on our Website - Equipped with: Caterpillar 3126T EnginePowershift TransmissionROPS Canopy Rear Protection Screen 30" Pads 6 Way PAT Blade Drawbar 2009 Midwestern Model 540 Draw Works Installed in 2010 at 2133 Hours20 Foot Boom Draw Works and Boom Certified40,000 LB. Lifting CapacityFire ExtinguisherLights Rated at 121 HP. Approximately 41,000 LBS.Repair / Condition ReportUpon purchase inspection and servicing, the following was completed: Engine oil filter was cut open and checked for contaminates, it was clean. Engine was then serviced and engine air filters were replaced. Transmission and hydraulic filters were cut open and checked for contaminates and they were clean. Checked the transmission strainer and it was clean. Checked the transmission and hydraulic oils and they were clean. The following repairs were completed by Marcel Equipment Limited: Replaced the temperature control. Repaired the seat assembly and suspension. Serviced the batteries and cable connections. Repaired the electrical components as required. Repaired the implement and boom controls as required. Replaced hoses as required. Installed NEW pins in the tilt cylinder. Installed NEW pins in the angle cylinder. Installed a NEW pitch link bearing. Shimmed the blade mount tower. Repaired miscellaneous leaks. Checked that pressures were set to OEM specifications. Repaired all the lights. Completed other miscellaneous repairs as needed. Completed any required cosmetic repairs. The side boom assembly was certified. Sandblasted, primed, painted and detailed this unit in our painting facilities.
|