Crestron QM-AMP3X80MM 3-Channel Multimedia Power Amplifier for sale in Buffalo, NY
The QM-AMP3X80MM is a professional power amplifier designed to provide exceptional audio performance as part of a complete MediaManager AV system or anywhere multi-channel amplification is required. Occupying just one rack space, the QM-AMP3X80MM provides three channels of amplification to complement the discrete stereo program and mono speech output channels featured on numerous Crestron QuickMediaź audio products. The QM-AMP3X80MM's first output channel delivers 80 Watts at 70 Volts to support distributed ceiling loudspeakers for speech reinforcement. The other two channels deliver 80 Watts each at 8 ohms or 110 watts at 4 ohms to drive a pair of program loudspeakers.All inputs are balanced with fixed input gain optimized for use with MediaManager components. An efficient Class G power amp topology puts more output power in less space while generating significantly less heat as compared to conventional amplifier designs. With Cresnet communications built-in, the amp's power can be controlled and temperature monitored from any 2-Series or MediaManager control system. Key Features Professional 3-channel Class G power amplifier 1X 80 Watt @ 70 Volts 2X 80 Watts @ 8 ohms; 110 Watts @ 4 ohms Power control and temperature monitoring via Cresnet Single-space rack-mountable Audio - Channel 1 Output Power 80 watts at 70 Volts Power Bandwidth 75 watts, 100Hz to 20kHz THD 150 (4/8 ohm outputs) Connectors INPUTS SPCH, L, & R (3) 3-pin 3.5mm detachable terminal blocks;Balanced line-level audio inputs;Input Impedance: 19k ohms balanced, 9.5k ohms unbalanced;Input Sensitivity: 1.2 Vrms for rated power (80W at 8 ohms);Common Mode Rejection: >70dB below 1kHz OUTPUTS SPCH 70V (1) 2-pin 5mm detachable terminal block;70 Volt speaker-level audio output;Output Power: 80 watts at 70 Volts OUTPUTS 4/8? (2) 2-pin 5mm detachable terminal blocks;4/8 ohm speaker-level audio outputs;Output Power: 80 Watts/Ch. @ 8 ohms, 110 Watts/Ch. @ 4 ohms NET (1) 4-pin 3.5mm detachable terminal block;Cresnet slave port, connects to Cresnet control network Ground (1) 6-32 screw, chassis ground lug Fuse Main fuse holder; 5 Amps, 250 Volts, time lag 120V ~50-60Hz (1) IEC Socket, main power input;Mates with removable power cord, included Controls & LED Indicators POWER (front) (1) Toggle switch with (1) green LED, enables/disables main power PWR (rear) (1) Toggle switch, selects between BYPASS mode for standalone operation and NET CONTROL mode for control via Cresnet PWR (rear) (1) green LED, indicates 24 Volts DC power supplied from Cresnet control network NET (rear) (1) yellow LED, indicates communication with Cresnet system SETUP (rear) (1) miniature pushbutton and (1) red LED, used for touch-settable ID (TSID) Power Requirements Main Power 120 Volts AC +15%/-25%, 50-60 Hz, 500 Watts Cresnet Power Usage 3 Watts (0.125 Amp @ 24 Volts DC) Environmental Temperature 32° to 104°F (0° to 40°C) Humidity 10% to 90% RH (non-condensing) Enclosure Chassis Steel, black matte powder coat finish, convection cooled, vented top and sides Faceplate Extruded aluminum, black matte powder coat finish with polycarbonate label overlay Mounting Freestanding or 1U 19-inch rack-mountable (adhesive feet and rack ears included) Dimensions Height 1.96 in (4.99 cm);1.73 in (4.39 cm) without feet Width 17.01 in (43.21 cm);19.0 in (48.26 cm) with ears Depth 12.53 in (31.82 cm) Weight 15.2 lb (6.9 kg) INTERNATIONAL VERSION (230 VAC) QMI-AMP3X80MM All the features and specifications of the QM-AMP3X80MM except: Audio - Channel 1 Output Power 80 watts at 100 Volts Power Bandwidth 75 watts, 100Hz to 20kHz THD
|
|
|